Turbo mod

[arfin]

Getting everything:

The hardest part to get for me were wires, huge mission to find the wires I did here.

http://img485.imageshack.us/img485/9031/gettingtools1gw.th.jpg (http://img485.imageshack.us/my.php?image=gettingtools1gw.jpg)

Step 1:
http://img161.imageshack.us/img161/1406/step17uz.th.jpg (http://img161.imageshack.us/my.php?image=step17uz.jpg)

Start by removing the enamel coating on the magnetic wires using the solder to melt them.

Step2:
http://img280.imageshack.us/img280/7196/step22jq.th.jpg (http://img280.imageshack.us/my.php?image=step22jq.jpg)

Solder the 2 magnetic wires to the Motor input chip.

[arfin]

Step3:

Solder the 10K resistors using this diagram.
http://img280.imageshack.us/img280/5462/epochturbo4oz.th.jpg (http://img280.imageshack.us/my.php?image=epochturbo4oz.jpg)

Should look like this:

http://img280.imageshack.us/img280/5051/step49xq.th.jpg (http://img280.imageshack.us/my.php?image=step49xq.jpg)

Step4:

Now tin the Wires (Easy enough)
http://img280.imageshack.us/img280/4729/step52jd.th.jpg (http://img280.imageshack.us/my.php?image=step52jd.jpg)

Step5:

Now follow the diagram in step 3, and solder on the wires to the Fet mod, I had a close-up pic with all wires, but can’t find it (some others are missing as well) This is what happens when you only have an 8mb Card.

http://img280.imageshack.us/img280/644/step63dk.th.jpg (http://img280.imageshack.us/my.php?image=step63dk.jpg)

[arfin]

Step6:

Solder the Red and black wires to the pcb, so far you should have these two wires, and the original magnetic wires soldered to the pcb.

http://img280.imageshack.us/img280/8205/step70zh.th.jpg (http://img280.imageshack.us/my.php?image=step70zh.jpg)

Step7:

Before you solder the motor wires on, first test them by hitting the throttle, and touching a wire motor to the motor pad, if it works then you should hear a speed increase, if not it shouldn’t move. Once you have that tested, connect the wires accordingly.

http://img161.imageshack.us/img161/4206/finished8ze.th.jpg (http://img161.imageshack.us/my.php?image=finished8ze.jpg)